background image

This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make
any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

 DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.

CAUTION

Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure.

The set complies with the FCC-Rules, Part 15 and
with 21 CFR 1040.10.

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any of the ventilation openings.
Install in accordance with the manufacturers
instructions.

8.

Do not install near any heat sources 

such as

radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9.

Do not defeat the safety 
purpose

of the polarized or

grounding-type plug. A polarized plug
has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety.When the provided plug does not
fit into your outlet, consult an electrician for replacement of
the obsolete outlet.

10.

Protect the power cord 

from being walked on or

pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.

11.

Only use attachments/accessories 

specified by the

manufacturer.

12.

Use only with a cart,

stand, tripod, bracket,

or table specified by the manufacturer or sold
with the apparatus.When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13.

Unplug this apparatus

during lightning storms or when

unused for long periods of time.

14.

Refer all servicing

to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as if the power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, or when the apparatus has been
exposed to rain or moisture, does not operate normally, or
has been dropped.

15.

Battery usage 

CAUTION

– To prevent battery leakage

which may result in bodily injury or damage to the unit:

Install 

all

batteries correctly,

+

and 

-

as marked on the unit.

Do not mix batteries (

old

and 

new

or 

carbon

and

alkaline

, etc.).

Remove batteries when the unit is not used for a long time.

EL 6475-E002: 01/3

IMPORTANT SAFETY INSTRUCTIONS

AC Polarized

Plug

Содержание DV-S5550




























Отзывы: