DVD-S796/DV-
S5270
2 - 12
13.
Disassembling the Spring
Motor Unit
1. Remove the three screws.
Note
Be sure to adjust the optical pickup tilt after replacing
the spindle motor unit.
3. Remove the solder from the pickup FPC’s soldered short-circuit
4. Adjust the optical pickup tilt after removing the solder.
(Refer to page 2-13, Optical Pickup Tilt Adjustment.)
Remove the solder.
Solder removal
direction
(Magnified view)
Open the circuit after short-circuiting it.
Screw
Traverse chassis
Spindle motor unit
5. If installing a new pickup, write the new head current
into memory as shown on page 1-6.
Do this first after turning on the unit with NO disc and
while the unit is cold (within the first 3 minutes of power
ON), or the jitter reading will not be accurate for the new
pickup head.
Содержание DV-S5270
