11
English
– TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and
AUTO mode depending on your TV.
The conversions supported are as follows:
1
In the Personal Preferences Menu, select TV
System.
2
Press
3
or
4
to select PAL, NTSC or AUTO.
Notes:
– If you have a PAL only TV, ensure that your TV
System setting is PAL.
– AUTO can only be selected when using a TV that
supports both the NTSC and PAL systems
(multisystems).
– This setting is applicable for CVBS output on cinch
only.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format
is most suitable for the best picture quality.
Sound
– Digital output
●
Digital output selection enables you to specify the
type of digital output suitable for your receiver.
●
Select ALL (default setting), if you had connected
your DIGITAL AUDIO OUT to a multichanel
decoder receiver.
●
Select PCM only if your receiver is not capable of
decoding compressed/encoded input stream.
●
Select OFF to deactivate the DIGITAL AUDIO
OUT.
Note:
– Digital output is not available for MP3 discs.
– Analog output
Select Stereo, Dolby Surround-compatible or 3D
Sound.
Stereo
: In this setting, the 5.1 audio channels are
down-mixed to a stereo signal. Select this setting
when connecting to a TV, stereo amplifier/
receiver, etc.
NTSC
PAL60
NTSC
Not
Supported
PAL
PAL
NTSC
PAL60
NTSC
NTSC
PAL
PAL
Disc
Output format
Type
DVD
VCD
NTSC
Format
Selected mode
PAL
NTSC
PAL
NTSC
PAL
AUTO
1en
1en
1
2
Digital output
Analog output
Night mode
All
PCM only
Off
Preparation
