Yamaha DTX900 Скачать руководство пользователя страница 58

Страница: 58 / 164

Saving the Created Data to a USB Storage Device

Quick Guide

DTX900 Owner’s Manual

Loading a File Saved to a USB Storage Device

This section describes instructions on loading a file saved to a USB storage device as an “AllData” file.

Press the [FILE] button to enter the File mode.

Press the [F2] LOAD button to call up the Load display.

Move the cursor to the TYPE parameter, then set the File type to
“AllData” by using the data dial or the [INC/YES] and [DEC/NO]
buttons.

Press the Cursor [

] button to move the cursor to the file/direc-

tory select box, then select the desired file to be loaded.

If the file is saved under any directory, select the directory including the desired file,
then press the [ENTER/STORE] button to find the desired file.

Press the [SF1] EXEC to execute the Load operation.

After the data has been loaded, a “Completed” message appears and operation returns
to the original display.

• Loading a file (extension: T3A) to the DTX900 automatically erases and replaces all exist-

ing data in the User memory. Make sure to save any important data to a USB storage
device before performing any Load operations.

While the data is being loaded, make sure to follow these precautions:

• Never remove or eject the media from the device (USB storage).

• Never unplug or disconnect any of the devices.

• Never turn off the power of the DTX900 or the relevant devices.

NOTICE

Содержание DTX900





































































































































































Результаты поиска

Содержание DTX900

Отзывы:

Похожие инструкции для DTX900

Бренды по названию

Популярные бренды

Yamaha DTX900, Руководство пользователя

Результаты поиска

Содержание DTX900

Отзывы:

Похожие инструкции для DTX900

Бренды по названию

Популярные бренды