6
RS500/RS700 Owner’s Manual
If your rack is unstable even on a flat surface, check whether the slits in the clamps
q
to
r
from Figure 1 line up with the
arrows on the horizontal pipes as shown in Figure 2. If this is not the case, loosen each of the clamp bolts
t
, adjust the
horizontal pipes such that the arrows line up with the slits, and then retighten the bolts.
Adjusting the RS500 or RS700
[Fi
g
ure 2: Close-up of clamp
q
]
Clamp
q
Clamp
r
Clamp
w
Clamp
e
Slit
Arrow
Clamp bolt
t
Horizontal pipe
Horizontal pipe
Horizontal pipe
Clamp
q
[Fi
g
ure 1: Assembled rack (RS700 shown)]
rs500_700_en_1224.fm Page 6 Friday, December 24, 2010 9:15 AM