Manual Development Group
©2016 Yamaha Corporation
Published 07/2016 YJ-A0
DTX-MULTI 12 Firmware Update Guide 4
Main Enhancements
【
V1.03 → V1.10
】
・
Added new pad types for the DT50S/DT50K and KP100. (101 page of Owner’s Manual)
・
Added the new trigger parameter “NoiseFilterTable.”
・
Added the new trigger parameter “2P Balance.”
・
Added new setting values “14&15” and “16&17” for Copy Trigger parameters “Pad to copy” and “Pad
to replace.” (104 page of Owner’s Manual)
■
Version History
【
V1.02 → V1.03
】
・
Added “ph2” setting for ClkOutSel (Click-track output selection) parameter. (84 page of Owner’s
Manual) This setting is used to output the click-track via the PHONES jack only, and all other sound
via the OUTPUT (L/MONO and R) jacks only.
・
Added new pad types as follows. (101 page of Owner’s Manual)
KU100, TP70S Snare, TP70S Tom, TP70S HiHat, TP70, PCY100, PCY90, XP80 Snare, XP80Tom,
XP70
・
Expanded the input gain setting range. (101 page of Owner’s Manual)
【
V1.01 → V1.02
】
・
Fixed a bug where, when two HH65 Hi-hat Controllers connected to the FOOT SW and HH CTRL
jacks were simultaneously operated, a sound would be produced only for one of them.
【
V1.00 → V1.01
】
・
Added new pad types for external pads as follows.
New Pad Type
Model
KP125W/125
KP125W/125
XP120/100Sn
XP120SD/100SD
XP120/100Tm
XP120T/100T
・
Fixed a problem in which the DTX-MULTI 12 may freeze along with the loss of currently recorded data,
when the recording operation uses up the full memory for User patterns.
・
Solved some minor errors.
