background image

34

SET MENU

1D LFE/BASS OUT (bass out
mode)

LFE signals carry low-frequency effects when this unit
decodes a Dolby Digital or DTS signal. Low-frequency
signals are defined as 90 Hz and below.

Choices: SWFR (subwoofer), MAIN, BOTH
Initial setting: BOTH

SWFR

Select this if you use a subwoofer. The LFE signals are
directed to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The LFE
signals are directed to the main speakers.

BOTH

Select this if you use a subwoofer and you want to mix
the main channel low-frequency signals with the LFE
signals.

Notes

• When playing a 2-channel source (CD, MD, tape, video

cassette etc.), select the BOTH position to direct low bass
signals (below 90 Hz) to the SUBWOOFER jack.

• When you select SMALL (SML) for items 1A, 1B and 1C, the

low-frequency signals (90 Hz and below) from those channels
are added to the LFE and output to the subwoofer.

1D LFE/BASS OUT

SWFR

MAIN BOTH

1D LFE/BASS OUT

SWFR MAIN BOTH

1E MAIN LEVEL (main level
mode)

Change this setting if you cannot match the output level
of the center and rear speakers with the main speakers
because of the unusually high-efficiency performance of
the main speakers.

Choices: Normal, –10 dB
Initial setting: Normal

Normal

Normally select this setting.

–10 dB

Select this if you cannot match the output level of your
effect speakers with that of your main speakers when
using the test tone. This setting decreases the main
speaker output level to about one-third of the normal
level.

2 L/R BALANCE (balance of the

left and right main speakers)

Use this feature to adjust the balance of the output level
from the left and right main speakers.

Control range: 10 for L/R
Initial setting: 0

Press 

i

 to decrease the output level for the

left main speaker. Press 

j

 for the right main

speaker.

Note

• The L/R BALANCE setting also applies to when headphones

are being used.

1E MAIN LEVEL

Normal

–10dB

1E MAIN LEVEL

Normal

–10dB

1D LFE/BASS OUT

SWFR

MAIN BOTH

2 L/R BALANCE

• • • • • • • • • •

 I

 

• • • • • • • • • •

 R

0

     

: Exit

/

–/+

: Adjust

0107AX620(GB)_31-39_EN

1/23/1, 9:27 AM

34

Содержание DSP-AX620










































































Отзывы: