Yamaha DRX-2, Руководство по обслуживанию

Страница: 91 / 190

DRX-2
DRX-2
91
80701 “The DVIO board is not present in this DVDR.”
80702 “The I2C could not be initialized.”
80703 “The DVIO module could not be reset.”
80704 “Unable to receive the reset indication from
the DVIO module.”
80705 “Unable to send the configuration to the DVIO
module.”
80706 “Unable to download the chip ID to the DVIO
module.”
80707 “Unable to set the mode of the DVIO module
to IDLE.”
80708 “Software Error in HandleStateAwaitingReply
function!”
80709 “Maximal number of retries reached by
HandleStateSending!”
80710 “Maximal number of retries (NACK’s) reached
“”(HandleStateSending)”
80711 “ W e t r i e d t o r e c e i v e a r e p l y f o r
DVIO_MAX_RETRIES_ACKREPLY times!”
80712 “ W e t r i e d t o r e c e i v e a r e p l y f o r
DVIO_MAX_RETRIES_REPLY times!”
80713 “We tried to receive an Acknowledge for
DVIO_MAX_RETRIES_ACK times!”
80714 “VSM UART error timeout transmitting
command”
80715 “VSM UART error timeout receiving reply”
80716 “VSM UART frame error occurred receiving
from DVIO board”
80717 “VSM UART parity error occurred receiving
from DVIO board”
80718 “The confirmation/indication from the DVIO
module is invalid.”
80719 “Setting the DVIO module in/out diagnostics
mode failed”
90121 “Error: audio data in host memory contains
wrong frequency: frequency Hz”
90122 “Error: audio data in host memory contains
silence!”
90123 “There is no correct audio frame in the buffer”
90124 “The audio frame has an illegal version bit”
90125 “The audio frame has an illegal bitrate-index”
90126 “The audio frame has an illegal sampling rate”
90127 “The CRC of the audio frame is wrong”
90128 “The audio frame is not MPEG-I layer II !”
90129 “Error cannot de-mute DAC on analogue
board”
90200 “”
90201 “Initialization of I2C failed”
90202 “Initialization of VIP and EMPIRE failed”
90203 “Initialization of PLL / Link failed.”
90204 “Next descriptor address set wrong.”
90205 “Turning on the colourbar failed”
90206 “No I2C communication possible to start video
encoder.”
90207 “Starting the video encoder failed.”
90208 “Transfer of data from video encoder to VSM
failed.”
90209 “Stopping the encoder failed.”
90210 “Turning off the colourbar failed.”
90211 “Cannot initialize hostdecoder parallel input”
90212 “Cannot initialize VSM AV-out DMA port”
90213 “Cannot initialize VSM AV-out port”
90214 “Cannot start VSM AV-out DMA port”
90215 “Cannot start VSM AV-out port”
90216 “Transfer of data from VSM to host decoder
failed.”
90217 “VSM and Hostdec memory do not match
(compared after transfer)”
90218 “ D e c o d i n g o f t h e v i d e o d a t a i n t h e
hostdecoder memory failed”
90219 “The data in the hostdecoder is not equal to a
colourbar”
90220 “The video encoder did not return the Group
Of Picture count.”
90221 “The video encoder did not receive data from
the VIP.”
90223 “Initialization of VIP and EMPRESS failed”
90224 “The video encoder did not return the current
status.”
90225 “The video encoder timed out in BUSY mode.
(no VIP input)”
90226 “The video encoder did not return the current
bitrate.”
90227 “ T h e v i d e o e n c o d e r d i d n o t s w i t c h t o
ENCODING mode.”
90228 “The video encoder could not start from
STOP/ IDLE mode.”
90229 “The video encoder did not switch from IDLE
to STOP mode.”
90300 “”
90301 “Initialization of I2C failed”
90302 “I2C communication to VIP failed”
90303 “Initialization of VIP failed”
90304 “Generation of Close Caption data failed”
90305 “VIP not locked to video signal”
90306 “Initialization of VBI Extractor failed”
90307 “No CC data received”
90308 “Closed Caption data overrun”
90309 “Closed Caption data does not match”
90310 “Switch off ColourBar failed”
90400 “”
90401 “Initialization of I2C failed”
90402 “Initialization of VIP and EMPIRE failed”
90403 “Initialization of PLL / Link failed.”
90404 “Next descriptor address set wrong.”
90405 “Turning on the colourbar failed”
Error Nr Error String Error Nr Error String