Yamaha DRIVE 2 SUPER HAULER 2019 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 60

background image

8-13

J2F

8

MAINTENANCE

Visually and manually inspect to
verify that the DC output cord,
plug and battery charging
receptacle are in good working
condition before each and every
use. Do not use the charger under
any of the following conditions:

G

The DC charging receptacle does
not grip the DC cord set plug
tightly, is loose or does not make
a good electrical connection.

G

The DC cord set plug or
charging receptacle feels hotter
than normal.

G

The DC cord set plug or
charging receptacle contacts are
bent, corroded, or are dark or
bluish in appearance.

G

The DC cord set plug, cords,
receptacle or equipment-
charging wiring are cut, worn,
broken or have any exposed
conductors.

G

The DC cord plug, cords, charger
or receptacles are damaged or
distressed in any way.

Using the charger with any of the
above symptoms could result in a
fire, property damage or personal
injury.

Do not disconnect the DC cord set
plug from the DC charger
receptacle when the charger is on.
If the charger must be stopped,
first disconnect the AC power
supply cord from its AC outlet, and
then disconnect the charger DC
cord set plug from the DC charger
receptacle.

Whenever removing AC or DC cord
set plugs from receptacles, pull
from the plug body and not from
their respective cords.

The instructions printed on the
charger (shown below) are for daily
reference. The charger is factory
preset for use with Trojan 48-volt golf
car batteries.

Charge only 48-volt battery
systems manufactured by Trojan
Battery Company. Damage to the
charger and batteries may result if
this charger is used on the wrong
battery type.

NOTICE

©

2019 Yamaha Golf-Car Company

«
...
39
40
41
42
43
...
»

Содержание DRIVE 2 SUPER HAULER 2019





























































Отзывы:

Нет отзывов

Похожие инструкции для DRIVE 2 SUPER HAULER 2019

Бренд: Ace Sports Страницы: 79

Бренд: Yerf-Dog Страницы: 22

2005 TRX400EX Sportrax 400EX

Бренд: Honda Страницы: 238

Бренд: E-TON Страницы: 36

outlander 400 series

Бренд: Can-Am Страницы: 156

Бренд: HOMCOM Страницы: 35

2009 Outlander 500 EFI

Бренд: Can-Am Страницы: 152

123 SWING YARDER

Бренд: Madill Страницы: 115

Бренд: FarmTek Страницы: 5

Бренд: KMW Страницы: 51

2014 RZR XP 1000

Бренд: Polaris Страницы: 474

Бренд: Baja motorsports Страницы: 44

Бренд: American Sportworks Страницы: 13

KODIAK 700 2018

Бренд: Yamaha Страницы: 180

Бренд: Yamaha Страницы: 150

Бренд: Yamaha Страницы: 98

500 MXU IRS 4X4 NAKED EFI

Бренд: KYMCO Страницы: 1

BIGFOOT B5-440-36

Бренд: Taylor-Dunn Страницы: 130

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды