Yamaha DragStar XVS1100 Скачать руководство пользователя страница 37

Страница: 37 / 104

INSTRUMENT AND CONTROL FUNCTIONS

3-20

CD-01E

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to “

”.

3. Turn the key to “ON”.
4. Shift the transmission into the neutral position.
5. Push the start switch.

Does the engine start?

The neutral switch may be defective.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.

Does the engine start?

The sidestand switch may be defective.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

The clutch switch may be defective.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

NOTE:

This check is most reliable if performed with
a warmed-up engine.

YES

The system is OK.

The motorcycle can be ridden.

YES

E_5pb.book Page 20 Friday, June 15, 2001 4:46 PM

Содержание DragStar XVS1100









































































































Результаты поиска

Содержание DragStar XVS1100

Отзывы:

Похожие инструкции для DragStar XVS1100

Бренды по названию

Популярные бренды

Yamaha DragStar XVS1100, Руководство пользователя

Результаты поиска

Содержание DragStar XVS1100

Отзывы:

Похожие инструкции для DragStar XVS1100

Бренды по названию

Популярные бренды