25
DM1000 Editor—Owner’s Manual
Timecode Counter Window
The Timecode Counter window displays the current timecode position in hours, minutes, seconds,
and frames — or measures, beats, and MIDI clocks — depending on the specified timecode source. It
works in unison with the timecode counters on the DM1000 Automix Main page. If the frame rate is
drop frame, a “.” is displayed following the frame number.
To open the Timecode Counter window, choose [Timecode Counter] from the [Windows] menu.
Effect Editor Window
The Effect Editor window enables you to edit the internal effects processors. To open the Effect Editor
window, choose [Effect Editor] from the [Windows] menu.
A
Effects processor select
These buttons are used to select the internal effects processors.
B
Effect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the effect
recalled to the currently selected effects processor. To edit the EFFECT NAME, click it and type. The
[LIBRARY] button opens the Effects Library window.
C
[IN] button
This button is used to set the metering position to the effects processor’s inputs.
D
[OUT] button
This button is used to set the metering position to the effects processor’s outputs.
Note:
You can open multiple Effect Editor windows by choosing [Windows] menu -> [Effect Editor] and
making a choice other than [Generic Editor]. The titles of these windows will indicate [Locked]. You can-
not open Library windows from windows that are indicated as [Locked].
When you recall effects, windows that do not indicate “Locked” in the title will be recalled.
hour minute second frame measure beat MIDI clock
A
B
5
3 4
F
G H