TROUBLESHOOTING
11
En
English
Refer to the following charts when the status messages appear during your iPod or XM Satellite Radio operations on this
unit. If you experience a problem that is not listed below, or if the instruction below does not help, set this unit to the
standby mode, disconnect the power supply cable, and contact the nearest authorized Yamaha dealer or service center.
■
iPod
In case of a transmission error with no status message appearing in the front panel display and in the OSD, check the connection
between your iPod and this unit.
■
XM Satellite Radio (U.S.A. and Canada models only)
Troubleshooting
Note
Status message
Cause
Remedy
See
page
Loading...
This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring the
song lists from your iPod.
Connect error
There is a problem with the signal path
from your iPod to this unit.
Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.
2
Try resetting your iPod.
—
Unknown iPod
Your iPod is not supported by this unit.
Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported.
—
iPod connected
The connection between your iPod and
this unit is completed.
Disconnected
Your iPod is removed from the Yamaha
iPod universal dock.
Set your iPod back in the Yamaha iPod universal
dock.
2
Unable to play
This unit cannot play back the files stored
on your iPod.
Check the playability of the files stored on your iPod.
—
Store other playable music files on your iPod.
—
Status message
Cause
Remedy
See
page
CHECK ANTENNA
XM Mini-Tuner and Home Dock are not
connected to the XM jack of this unit or
not working properly.
Check XM Mini-Tuner and Home Dock connections
and adjust the orientation for the best reception level.
5
UPDATING
The XM user encryption code is being
updated.
Wait until the encryption code is updated.
—
NO SIGNAL
The signal is too weak.
Adjust the orientation of the indoor antenna of Home
Dock for the best reception level.
5
LOADING
It takes longer than four seconds to decode
audio or text data.
Wait until the decoding process is finished.
—
OFF AIR
The currently selected XM channel is not
broadcasting signals.
Check the channel number again or select another
XM channel.
—
<XM> - - -
The Channel Station ID (SID) is no longer
available.
- - - / - - -
No artist name or song title is available.
<CAT> - - -
No channel is available for the selected
category.
Select another channel category by pressing
CAT/A-E
repeatedly.
7
