Disk Operations
79
Load
Once you’ve saved your User data onto a floppy disk, you can reload that data
back to the DGX-500/300. You can also load style data from the included disk or
commercially available Yamaha Style File disks.
1
Insert the floppy disk into the disk drive.
2
Press the [LOAD] button.
Press the [LOAD] button again to exit from the LOAD screen.
3
Select the file to load.
Use the [+]/[-] buttons.
4
Press the [EXECUTE] button.
5
Execute the Load operation.
Press the [+] button (“YES”), and the Load operation will start. Once started,
the operation cannot be canceled.
As the file is loading, “Loading” will appear on the top line of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to load the file, press the [-] button (“NO”) instead of the
[+] button (“YES”).
To exit from the LOAD screen, press the [LOAD] button.
• If the [LOAD] button is pressed
when there is no floppy disk
inserted into the disk drive, a “No
disk” message appears at the top
of the display, and all disk opera-
tions will be disabled.
This case is user file. Style file indicates “L-S”.
Filename
L-U
• If the disk contains no file, the
display shows “No file” indicating
that the Load function is not pos-
sible.
Filename
L-U
• When data is loaded from a
floppy disk to the DGX-500/300,
the data already in the memory of
the DGX-500/300 will be
replaced by the data on the disk.
Save important data into a disk
file before doing the operation.
Sure?
YES
• While the file is loading (the
DISK IN USE lamp is lit), never
eject the floppy disk or turn the
power off.
Loading
L-U
Complete
