DTXTREME
30
**
YAMAHA DRUM TRIGGER MODULE
**
**
DTXTREME
**
[DLAG 1]
MIN
MAX
MIN_ATT
MAX_ATT
45
57
90
113
[DLAG 1]
MIN
MAX
MIN_ATT
MAX_ATT
45
57
90
113
[DLAG 2] MIN_1R
MAX_1R
MIN_CR
MAX_CR
96
103
16
26
1 MAIN ROM
[DLAG 3] MIN_POS
MAX_POS
58
73
[DIAG 4] RIMATT
BRSATT
OUTATT
58
73
31
A. TEST ENTRY
Activate power on the main unit by pressing the [PLAY] + [EXIT/ NO] keys at the same time.
[Initial screen]
After a while, the following indication appears.
If any change is made, set each parameter to the following value through [DIAG 1] ~ [DIAG].
Setting
Using [
▲
] and [
▼
], switch over screens through [DIAG 1] ~ [DIAG 4]. Change each parameter by rotating the encoder under
the numeral. The following describes each parameter.
* Variable parameter
The parameters, which are set at the upper or lower limit in the range of 0 ~ 127, are all included in the OK range
[DIAG 1] LCD indication
· MIN =45 (2D)
Lower limit in the OK range in case sw = ON at INPUT1~16.
· MAX =57 (39)
Upper limit in the OK range in case sw = ON at INPUT1~16.
· MIN_ATT =90 (5A)
Lower limit in the OK range in case sw = ON at INPUT1~16.
· MAX_ATT =113 (71)
Upper limit in the OK range in case sw = ON at INPUT1~16.
[DIAG 2] LCD indication
· MIN_IN1R =127- 31 =96 (60)
Upper limit in the OK range of INPUT1 RIM (value by subtraction from 127 due to reverse polarity)
· MAX_IN1R =127- 24 =103 (67)
Lower limit in the OK range of INPUT1 RIM (value by subtraction from 127 due to reverse polarity)
· MIN_CR =16 (10)
Lower limit in the OK range after time elapse in the time constant inspection in case sw = ON at INPUT1~16
· MAX_CR =26 (1A)
Upper limit in the OK range after time elapse in the time constant inspection in case sw = ON at INPUT1~16
Lower limit of the maximum value in the OK range in the input test for INPUT1 POSITION SENS
Upper limit of the maximum value in the OK range in the input test for INPUT1 POSITION SENS
· RIMATT =45 (2D)
The unit of the sine wave output attenuation level is – 0.75 dB In the inspection of INPUT2-5 RIM.
· BRSATT =72 (48)
The unit of the sine wave output attenuation level is – 0.75 dB In the inspection of brush ON.
· OUTATT =31 (1F)
The unit of the sine wave output attenuation level is – 0.75 dB In the inspection of input1~16.
Note that the figure is a default one with the value in the parentheses ( ) represented by HEX.
Press the [ENTER/ YES] key after setting each parameter. The following appears.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299