Yamaha DD-45, Руководство пользователя

Страница: 12 / 36

Playing the Pads
12
DD-45/YDD-40 Owner’s Manual
Assigning Voices to Individual Pads and Saving to a
Custom Kit
The instrument contains a total of 99 high quality drum Voices (see the “Voice List” on page 19)—and you can
assign these freely to each of the four pads and a pedal. Try assigning some different Voices and save your
own “
CU
” Custom Drum Kits.
NOTE
• Any data assigned to the Custom Kit will be replaced by factory default values (“
1
”) when the power is turned off.
• Custom Kit “
CU
” and Drum Kit “
1
” contents are the same until modified (see the “Drum Kit List” on page 20).
• Any changes made to one of the preset Drum Kits will automatically be saved in the “ CU ” Custom Drum Kit.
1.
Press and hold the [ASSIGN] but-
ton.
Keep holding down the [ASSIGN] button through
steps 2 and 3.
2.
Strike any pad one time (or press a
pedal) to enable it to be assigned.
The currently assigned Voice number for that pad/
pedal appears on the display.
3.
Select a Voice Number.
You can select the Voice by repeatedly striking the
pad or repeatedly pressing the pedal (while listen-
ing to the Voice), or by using the [ ] and [ ] but-
tons.

Striking the pad or pressing the pedal to
select a Voice.
Every time the pad is struck or a pedal is
pressed, Voice numbers will increase by a value
of 1. In this method, you can hear and select an
assigned Voice.

Using the [ ] and [ ] buttons to select a
Voice.
Voice numbers increase as the [ ] button is
pressed, and decrease as the [ ] button is
pressed. Pressing the [ ] and [ ] buttons
simultaneously restores the original Voice.
Repeat the previous steps 2 and 3 for any or all of
the pads and the pedal.
4.
Release the [ASSIGN] button to
execute the assignment.
The instrument will automatically be saved to the
Custom Kit “
CU
.” You can now play the Voice you
have assigned to the pad/pedal.
Hold
39
Voice
number
1 2 98 99
1 2 98 99
1 2 98 99