2
Editing a Program
Use the following procedure to edit the currently selected program.
Press the PARAMETER key corresponding to the
parameter(s) you wish to edit.
★
Each press of the [DELAY] key displays a single page of the param-
eter list. Press the key as many times as necessary to advance to the
desired page.
Select the parameter you wish to change.
2
Use the DATA ENTRY dial to change the
parameter’s value.
★
The [FB], [MOD], and [DUCK] keys also act as on/off toggles for
feedback, modulation, and duck functions. The first time you press
the key it returns the corresponding parameter list. Pressing the key
while the list is displayed will toggle the function ON or OFF.
1
DELAY
FB
MOD
DUCK
PARAMETER
•
If you are working with a Single or Dual delay pro-
gram, you can access parameters using any of the
four PARAMETER keys.
•
If you are working with a Freeze or S&H program,
only the [DELAY] PARAMETER key is effective.
CURSOR
←
•
The cursor (reverse-video highlight) indicates
the currently selected parameter.
3
DATA ENTRY
