Yamaha CZD300J, Руководство пользователя

Страница: 33 / 126

Instrument an d control functions
5-4
5
The multi-function display is equipped
with the following:

clock

fuel meter

coolant temperature meter

tripmeter display

information display
TIP
To switch the displays between kilo-
meters and miles, turn the main switch
to “ON” while pushing the “INFO”
switch, and then continue to push the
“INFO” switch for eight seconds.
Clock
The clock uses a 24-hour time system.
To set the clock
1. Turn the main switch to “OFF”.
2. Push and hold the “TRIP” switch.
3. Turn the main switch to “ON”
while pushing the “TRIP” switch,
and then continue to push the
“TRIP” switch for eight seconds.
The hour digits will start flashing.
4. Use the “TRIP” switch to set the
hours.
5. Push the “TRIP” switch for three
seconds, and then release it. The
minute digits will start flashing.
6. Use the “TRIP” switch to set the
minutes.
7. Push the “TRIP” switch for three
seconds, and then release it to
start the clock.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The segments of
the fuel meter disappear from “F” (full)
towards “E” (empty) as the fuel level
decreases. When the last segment of
the fuel meter starts flashing, refuel as
soon as possible.
TIP

If a problem is detected in the fuel
meter, the all segments will flash
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
1. “TRIP/INFO” switch
1. Clock
1
(b) (a)
1
1. Fuel meter
1
UB7410E0.book Page 4 Tuesday, May 30, 2017 3:08 PM