Yamaha CS1X Скачать руководство пользователя страница 35

Страница: 35 / 64

The value of some Layers may forcibly be changed when

using the Variation effect.

For more information, see page 47.

■

FILTER

This sets the filter parameters for each Layer. There are two

parameters, CUTOFF and REZ (Resonance).

Generally, filters change the timbre by passing signals

within a specific frequency bandwidth and cutting others. The CS1x
features an LPF (Low Pass Filter) which passes the signals below the
specified frequency point (cutoff frequency) and cuts the signals
above it.

Depending on the voice selected, changing certain

parameters may not produce a noticeable effect.

CUTOFF:

Determines the cutoff frequency of the filter, or the

frequency point above which other frequencies are filtered out.

Higher settings result in brighter tones and lower settings result

in darker tones.

REZ (Resonance):

Sets the amount of filter resonance or

emphasis around the cutoff frequency. Higher settings produce

a higher resonant peak, while lower settings produce a relatively

flat response.

Settings:

CUTOFF: -64 ~ +63

REZ (Resonance): -64 ~ +63

FREQUENCY

VOLUME

CUTOFF FREQUENCY

RESONANCE

FREQUENCY

VOLUME

CUTOFF FREQUENCY

FREQUENCIES CUT

FREQUENCIES PASSED

NOTE

Cutoff

Resonance

NOTE

■

PAN

This sets the panning (the left or right position in the stereo

spectrum) of each Layer. Different pannings can be set for each

Layer, thus providing for a richly textured stereo image (for

stereo output).

Settings:

Random, L63 (far left in the stereo image) to L01 to C00 (center in

the stereo image) to R01 to R63 (far right in the stereo image)

When set to "Random", the pan position of each Layer will

alternate between left and right each time a Performance is played.

Some of the voices are preset and have a fixed panning of

"left" in the lower register and "right" in the higher register. In such a
case, you cannot modify the pan setting.

■

EFFECT

This sets the effect send (output) level of each Layer. There are

three parameters: REV SEND (Reverb Send), CHO SEND (Chorus

Send) and VARI SEND (Variation Send). Each effect send level set

here will be output to the Reverb, Chorus, and Variation effect

sections as previously selected (see page 23).

REV SEND (Reverb Send):

Determines the send level of the

Reverb effect.

CHO SEND (Chorus Send):

Determines the send level of the

Chorus effect.

VARI SEND (Variation Send):

Enables or disables the output of

the Variation effect.

Settings:

REV SEND (Reverb Send): 0~127

CHO SEND (Chorus Send): 0~127

VARI SEND (Variation Send): OFF, ON

Reverb Send

Chorus Send

Variation Send

NOTE

Содержание CS1X

































































Результаты поиска

Содержание CS1X

Отзывы:

Похожие инструкции для CS1X

Бренды по названию

Популярные бренды

Yamaha CS1X, Руководство пользователя

Результаты поиска

Содержание CS1X

Отзывы:

Похожие инструкции для CS1X

Бренды по названию

Популярные бренды