Setup Procedures
25
*
When using Windows 95/98/98 Second Edition, follow Step
&
to open
the “Device Manager” window, then double-click the “YAMAHA
CRW2100E” icon to open the “YAMAHA CRW2100E Properties”
window, and click the “Settings” tab to select it. A screen similar to the
one below appears. Make sure that the “Sync data transfer” check box is
not checked. (There is no need to set the “Sync data transfer” check box
if it does not appear.) By checking the “DMA” check box, you can
enable high-speed data transfer between the CRW2100E drive and the
computer. However depending on your computer system, this may
cause operation to become unstable. If this occurs, uncheck “DMA.”
* This is a screen shown in the Windows 98 Second
Edition environment.
n
Windows NT does not have a “DMA” setting. Nor do you need to set the “Sync data
transfer” parameter, since it will not appear.
n
Enabling or disabling “Sync data transfer” option does not affect the CRW2100E
drive.
Installing the CD Writing Software
(
Install the CD writing software.
n
For details about how to install the software, refer to the documentation that came
with it.
Содержание CRW-2100E Series
