background image

CP4 STAGE/CP40 STAGE Owner’s Manual

3

SPECIAL MESSAGE SECTION (for CP40 STAGE)

This product utilizes batteries or an external power supply (adapter). 
DO NOT connect this product to any power supply or adapter other 
than one described in the manual, on the name plate, or specifically 
recommended by Yamaha.

WARNING:

 

Do not place this product in a position where anyone 

could walk on, trip over, or roll anything over power or connecting cords 
of any kind. The use of an extension cord is not recommended! If you 
must use an extension cord, the minimum wire size for a 25’ cord (or 
less) is 18 AWG. NOTE: The smaller the AWG number, the larger the 
current handling capacity. For longer extension cords, consult a local 
electrician.
This product should be used only with the components supplied or; a 
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is 
used, please observe all safety markings and instructions that accom-
pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the 
time of printing. However, Yamaha reserves the right to change or mod-
ify any of the specifications without notice or obligation to update exist-
ing units.
This product, either alone or in combination with an amplifier and head-
phones or speaker/s, may be capable of producing sound levels that 
could cause permanent hearing loss. DO NOT operate for long periods 
of time at a high volume level or at a level that is uncomfortable. If you 
experience any hearing loss or ringing in the ears, you should consult 
an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before 
damage occurs.
Some Yamaha products may have benches and/or accessory mounting 
fixtures that are either supplied with the product or as optional accesso-
ries. Some of these items are designed to be dealer assembled or 
installed. Please make sure that benches are stable and any optional 
fixtures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other 
uses are recommended.

NOTICE: 

Service charges incurred due to a lack of knowledge relating to how a 
function or effect works (when the unit is operating as designed) are not 
covered by the manufacturer’s warranty, and are therefore the owners 
responsibility. Please study this manual carefully and consult your 
dealer before requesting service.

ENVIRONMENTAL ISSUES: 

Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the 
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be 
aware of the following:

Battery Notice: 

This product MAY contain a small non-rechargeable battery which (if 
applicable) is soldered in place. The average life span of this type of 
battery is approximately five years. When replacement becomes nec-
essary, contact a qualified service representative to perform the 
replacement.
This product may also use “household” type batteries. Some of these 
may be rechargeable. Make sure that the battery being charged is a 
rechargeable type and that the charger is intended for the battery being 
charged.
When installing batteries, never mix old batteries with new ones, and 
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating 
and battery case rupture.

Warning: 

Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as 
regulated by the laws in your area. Note: Check with any retailer of 
household type batteries in your area for battery disposal information.

Disposal Notice: 

Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all local, 
state, and federal regulations that relate to the disposal of products that 
contain lead, batteries, plastics, etc. If your dealer is unable to assist 
you, please contact Yamaha directly.

NAME PLATE LOCATION: 

The name plate is located on the rear of the product. The model num-
ber, serial number, power requirements, etc., are located on this plate. 
You should record the model number, serial number, and the date of 
purchase in the spaces provided below and retain this manual as a per-
manent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP  

(rear)

IMPORTANT SAFETY INSTRUCTIONS (for CP4 STAGE)

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong is provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11 Only use attachments/accessories specified by the 

manufacturer.

12 Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the cart/
apparatus combination to avoid injury 
from tip-over.

13 Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

(UL60065_03)

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

Содержание CP4 Stage





























































Отзывы: