Parallel Hookup
5
CP2000—Owner’s Manual
Parallel Hookup
In PARALLEL mode, the L and R channels operate independently but the input signal
for both channels is sourced from the Channel L inputs. This mode is typically used
with a mono source and allows independent volume control of two sets of speakers.
The following hookup example shows how the CP2000 can be used in PARALLEL
mode.
PARALLEL Notes:
•
The input source must be connected to the Channel L inputs.
•
The Channel R inputs are inactive.
•
The Channel L and Channel R volume levels can be set independently.
•
Speakers can be connected to the 1/4" phone jacks and 5-way binding posts.
1
3
2
NEUTRIK
2
3
1
2
2
1
CHANNEL R
CHANNEL L
SPEAKERS
BRIDGE
CHANNEL R
CHANNEL L
(BRIDGE)
STEREO
BRIDGE
PARALLEL
STEREO
BRIDGE
PARALLEL
YAMAHA
SPEAKER PROCESSING
OFF
ON
(–)
(+)
1
INPUT
Total impedance:
2
Ω
min (1000 W)
4
Ω
(650 W)
8
Ω
(450 W)
Total impedance:
2
Ω
min (1000 W)
4
Ω
(650 W)
8
Ω
(450 W)
Mixer
MONO OUT
