39
CVP-210/208
Basic Operations — Organizing Your Data
When the power is turned on, the
MAIN
Display appears, showing important and
relevant operation information.
Pressing the
[A]
-
[J]
buttons when the
MAIN
Display appears calls up displays
corresponding to each button. The displays called up by the buttons (with the exception
of
[B]
and
[C]
) are called
Open/Save
displays (see following page). Pressing the
[B]
and
[C]
buttons calls up the
Lyrics
display and
Score
display respectively.
1
Transpose (page 144)
The [TRANSPOSE] buttons allow the pitch of the keyboard and song to be shifted down or up in semitones. The transpose value by the
semitone shifted is displayed here.
2
Song (page 78)
The name of the currently selected song and other song information is displayed.
3
Playback Position of Song (page 78) or Accompaniment Style (page 63)
The current position of the song or the accompaniment style being played is displayed.
4
Tempo (page 54)
When a song or a accompaniment style is playing, the tempo is displayed.
5
Chord (page 66)
When [ACMP] is on, the chord specified in the left hand section is displayed.
6
Accompaniment Style (page 63)
The name, beat, and tempo of the accompaniment style selected currently is displayed.
7
Intro and Ending (page 70)
The names of the intro and ending of the currently selected style are displayed.
8
Pedal Function (page 142)
In addition to the conventional Sustain, Sostenuto and Soft functions, the pedals can be assigned to other various functions, such as Song
Start/Stop and Glide. The functions assigned to the three different pedals are displayed here.
9
Registration Sequence (page 145)
You can save your custom panel settings as a Registration Memory preset and recall it at any time pressing the appropriate REGISTRATION
MEMORY [1] - [8] button. You can also use the Registration Sequence function to program the Registration Memory presets to be selected in
any specified order, and step through that order by using the [BACK]/[NEXT] buttons or the pedal. The Registration Sequence is displayed
here (unless Registration Sequence is set to OFF).
0
Main Part (page 58)
The voice selected for the Main part is displayed.
A
Layer Part (page 60)
The voice selected for the Layer part is displayed.
B
Left Part (page 61)
The voice selected for the Left part is displayed.
C
Split Point (page 141)
Split Points are specific positions on the keyboard that divide the keyboard into separate sections. There are two kinds of Split Points: “A”,
which separates the auto accompaniment from the rest of the keyboard, and “L”, which divides the left-hand and right-hand sections.
D
Registration Memory Bank (page 89)
Registration Memory presets are stored in banks, eight presets to a bank. The name of the currently selected Registration Memory bank is
displayed here.
E
Volume balance of the parts (page 65)
You can change the volume balance by pressing the [1
▲▼
] - [8
▲▼
] buttons under the LCD. The volume balance of each part is displayed.
Contents shown in the Main Display
If the MAIN Display is not
shown, press the [DIRECT
ACCESS] button followed by
the [EXIT] button.
1
8
9
0
A
B
C
D
E
2
3
4
5
7
6
Содержание Clavinova CVP-208
Страница 175: ...MEMO 175 CVP 210 208 MEMO ...
Страница 176: ...MEMO CVP 210 208 176 MEMO ...