CVP-202
32
X
Adjust the volume of the main voice.
Use the data dial or
[–]
and
[+]
buttons to change the volume, or hold
down the
VOLUME
button to increase the volume.
Press the
[–]
and
[+]
buttons simultaneously to restore the basic setting.
■
Setting the Volume of the Main Voice
...........................................
You can use the
VOLUME
function in the KEYBOARD [RIGHT1]
page to change the volume of the main voice.
To adjust the overall keyboard volume,
use the KBD VOL function in the main
display (page 23) instead.
Z
Press the
VOLUME
button.
➔
The
VOLUME
function is highlighted.
VOLUME
• Range: 0 — 127
• Basic setting: 127
■
Setting the Octave of the Main Voice
...........................................
The
OCTAVE
function in the KEYBOARD [RIGHT1] display lets
you adjust the pitch of the main voice up or down by one or two octaves.
Press the
OCTAVE
button.
➔
The value changes each time you press the button.
OCTAVE
• Settings: –2 (2 octaves lower)
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)
• Basic setting: 0
■
Setting the Stereo Position of the Main Voice
....................
The
PAN
function in the KEYBOARD [RIGHT1] display lets you
adjust the stereo position of the main voice.
Z
Press the
PAN
button.
➔
The
PAN
function is highlighted.
PAN
• Settings: L — — R
• Basic setting: (center)
Selecting Voices
X
Adjust the stereo position.
Use the data dial or
[–]
and
[+]
buttons to change the stereo position,
or hold down the
PAN
button to move the position to the right.
Press the
[–]
and
[+]
buttons simultaneously to restore the basic set-
ting.
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 137) to MANUAL.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
30
