Yamaha Clavinova CLP-930, Руководство пользователя

Страница: 27 / 66

27 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CLP-950/930
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
Clavinova extraordinary versatility. The functions are categorized in groups as
follows:
CLP-930 CLP-950
F1 F1 Tuning ............................................................. 28
F2 F2 Scale ............................................................... 28
F3 F3 Dual Mode Functions .................................... 29
– F4 Split Mode Functions .................................... 30
F4 – Left Pedal Mode ............................................. 31
– F5 Pedal Functions ............................................. 32
F5 F6 Metronome Volume ........................................ 32
F6 F7 Preset Song Part Cancel Volume .................. 32
F7 F8 MIDI Functions ............................................... 33
F8 F9 Backup Functions .......................................... 36
To Select a Function …
...........................................................................
Z
Press the [FUNCTION] button so that its indicator lights.
NOTE
• Functions cannot be selected during demo/preset song playback or when
the user song recorder is in operation.
X
Use the [TEMPO/FUNCTION
t
,
s
] buttons to select the desired
function: F1 through F8 on the CLP-930; F1 through F9 on the
CLP-950.
C
In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4:
CLP-950), Pedal Functions (F5: CLP-950), MIDI (F7: CLP-930,
F8: CLP-950), and Backup (F8: CLP-930, F9: CLP-950) functions,
you will have to press the
[+/YES] button once to enter the respec-
tive sub-mode after the function has been selected, and then use the
[TEMPO/FUNCTION
t
,
s
] buttons again to select the desired
sub-function.
NOTE
• The Dual or Split (CLP-950) mode must be engaged before the F3 and
F4 functions can be selected, respectively. If the corresponding mode is
not engaged, “
F3.- ” or “ F4.- ” will appear on the display and the corre-
sponding sub-mode will not be available.
• The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode (CLP-950) can be
engaged.
V
Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
NOTE
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
B
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
●
Operation Example
(sub-mode)
Press [+/YES]
Use [TEMPO/
FUNCTION
t
,
s
]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once
ON
FUNCTION
START/
STOP
TEMPO/FUNCTION
METRONOME
ON
FUNCTION
START/
STOP
TEMPO/FUNCTION
METRONOME