background image

23

CLP-810S

C

8

• When moving the instrument after assembly, always hold the

lower surface of the main unit, NEVER the top portion. Improper
handling can result in damage to the instrument or personal injury.

<

Set the adjuster.

For stability, an adjuster is provided on the bottom of the

pedal box (C). Rotate the adjuster until it comes in firm contact
with the floor surface. The adjuster ensures stable pedal operation
and facilitates pedal effect control. If the adjuster is not in firm
contact with the floor surface, distorted sound may result.

After completing the assembly, please
check the following.

• Are there any parts left over?

Review the assembly procedure and correct any errors.

• Is the Clavinova clear of doors and other movable fixtures?

Move the Clavinova to an appropriate location.

• Does the Clavinova make a rattling noise when you shake it?

Tighten all screws.

• Does the pedal box rattle or give way when you step on the ped-

als?

Turn the adjuster so that it is set firmly against the floor.

• Are the pedal and power cords inserted securely into the sockets?

Check the connection.

• If the main unit creaks or is otherwise unsteady when you play on

the keyboard, refer to the assembly diagrams and retighten all
screws.

Содержание Clavinova CLP-810S





























Отзывы: