Yamaha Clavinova CLP-525, Руководство пользователя

Страница: 29 / 38

29
CLP-525 Owner’s Manual
Keyboard Stand Assembly
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all
parts in the correct orientation. Please assemble the unit in
accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified
sizes. Do not use any other screws. Use of incorrect screws
can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of
the unit.
• To disassemble the unit, reverse the assembly sequence
given below.
Remove all parts from the package and make sure you
have all of the items.
1.
Attach (finger-tighten) C to D and
E.
1-1
Untie and straighten out the bundled pedal
cord.
Don’t discard the vinyl tie. You will need it later in
step 6.
1-2
Align D and E with each end of C.
1-3
Attach D and E to C by finger-tightening
the long screws (6 x 20 mm).
2.
Attach B.
2-1
Align the screw holes on the upper side of B
with the bracket holes on D and E, then
attach the upper corners of B to D and E by
finger-tightening two thin screws (4 x 12
mm).
2-2
While pushing the lower part of D and E
from outside, secure the bottom ends of B
using two tapping screws (4 x 20 mm).
Have a Phillips-head (+) screwdriver of the appropriate size
ready.
Foamed styrol pads
Remo v e foamed styrol pads from the package, position them
on the floor, then place A on top of them. Position the pads so
that they
w ill not hide the connectors on the b ottom of A.
B u ndled pedal cord inside
6 x 20 mm long scre w s x 4
4 x 12 mm thin scre w s x 2
4 x 20 mm tapping scre w s x 4
6 x 16 mm short scre w s x 6
Cord holders x 2
Po w er cord x 1
AC po w er adaptor x 1
The po w er cord and adaptor may
not b e incl u ded, or may look
different from the ill u stration
a b o v e, depending on yo u r
partic u lar area. Please check w ith
yo u r Yamaha dealer.
4 × 10 mm
thin scre w s x 2
Headphone hanger x 1
1-1
1-3
2-1
2-2
2-2
2-3
2-2