35
Advanced Functions
Recording Your Performance
2.
Select a Song number for the data.
Select a Song number by using the [-/NO] [+/YES] buttons.
• USER MIDI ...................U.01-U.10
• USB MIDI ......................U.00-U.99
• USB AUDIO ..................A.00-A.99
NOTICE
If the Song contains data, the part lamp(s) [RIGHT] and/or [LEFT] lights up in green when you select a
Song. Note that recording new data on this part will erase the existing data.
3.
Select the desired Voice and other parameters, such as time
signature, for recording.
Select a Voice by pressing one of the Voice buttons. If necessary, set other
parameters, such as time signature and effects, in this step.
4.
Call up the Record mode.
Press the [REC] button to call up the Record mode.
The [REC] and [RIGHT] lamps flash in red during MIDI recording while
the [REC] and [RIGHT][LEFT] lamps flash in red during Audio recording.
The [PLAY/PAUSE] lamp flashes according to the current tempo.
Record mode can be disengaged before recording by pressing either the
[REC] or [STOP] button.
5.
Start recording.
With MIDI Recording:
Recording will begin automatically as soon as you play a note on the
keyboard. When you wish to record an empty section at the start of the
Song, press the [PLAY/PAUSE] button to start recording. While recording,
the current measure number is shown on the display.
With Audio recording:
Press the [PLAY/PAUSE] button to start recording.
While recording, the elapsed time is shown on the display.
Part button indications
Off:
Contains no data
On (green):
Contains data
Flashing (red):
Part is enabled
for recording
NOTE
You can use the metronome while
recording, although the
metronome sound will not be
recorded.
NOTE
If the memory of the drive is
running out, “Enp” will appear in
the display after pressing the
[REC] button. You can start
recording, but the memory may
become full during recording. We
recommend that you first remove
any unnecessary files (pages 37,
43) to ensure sufficient memory
capacity.
Measure number
NOTE
When recording an audio Song,
the number on the left represents
minutes and the two numbers on
right represent seconds. If
recording 10 minutes or longer,
the tens digit is not shown (for
example, 12 minutes would be
shown as “2.00”).
NOTE
With audio recording, the sound
input from the AUXIN jack is also
recorded.
Elapsed time
