Yamaha CHS-506, Руководство пользователя

Страница: 5 / 6

9
CHS-506
ASSEMBLY PROCEDURE
With the fixing hole on the base bar aligned
with the bolt hole in the base, connect the
base bar to the base. Tighten the block bolt to
secure the base bar to the base. (The upper
end of the side column acts as tool to tighten
the block bolt. Insert the upper end of the col-
umn and tighten the block bolt by rotating the
side column.)
1
Fit the guide board onto the side columns
and lower the guide board until it rests on the
board rest.
Attach the hanger bar on the top of the side
columns and secure with the wing bolts. At
this time, also tighten the wing bolts on the
side column and base.
4
Before hanging the sound columns on the
hanger, activate the damper stopper.
Position the sound column with its pitch in-
scription facing forward, place one side of the
wire into the slot of the hanger pin. Next, hook
the wire on the round head rivet, finally place
the wire into the slot of the remaining hanger
pin.
6
When hanging the sound columns, it is easier
to hang the accidental tones (C#53-F#70) first,
then hang the natural tones (C52-G71).
CH-500
Sound Column
Round Head
Rivet
Wire
Hanger Pin
Hanger Pin
Teflon Tube
* Disassembly is performed simply by reversing the assembly order.
Guide Board
Board Rest
Side Column
Hanger Bar
Position the sound column with its pitch in-
scription facing forward, and attach the sound
column to the hanger bar.
5
After tightening the block bolt, re-insert the
side column into the base with making sure
that the side column’s hanger attachment po-
sitioned upright.
2
Side Column
Base Bar
Sound Column
Round Head
Rivet
Wire
Hanger Pin
Hanger Pin
Teflon Tube
Side Column
Base
Hanger Bar Attachment
Fixing Hole
Base Bar
Block Bolt
3