24
SYSTEM CONTROL
• Same as CD
=
TAPE
• Recording automatically starts at the beginning of
the tape. (By pressing
DUBBING START
, the
tape automatically rewinds to the beginning if it is
in the middle.)
2
Press
DUBBING START
to start recording.
Note
• The displays
1
~
4
which include the component you have
not connected to your receiver (RX-E400) will be skipped.
To stop dubbing
Press
&
.
Before recording
When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. A source from
the component which is connected to the
AUX
terminal
component can be recorded on a tape or MD.
Dubbing setting
There are six different combinations of components. Once
you choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
DUBBING
START
DUBBING
MODE
1
2
1
Decide the combination of the components. Each
time you press
DUBBING MODE
, the mode will
change in the below order.
•
Recording automatically starts from the beginning
of the tape. (By pressing
DUBBING START
, the
tape automatically rewinds to the beginning if it is
in the middle.)
•
When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
•
The sound is automatically faded out when it gets
close to the end of side B.
3
4
Record unit
Play unit
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD
CD
TAPE
AUX
MD
REC/PAUSE
TAPE
REC/PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
Record unit
Play unit
0111CRXE400(M).23-25.E
02.6.13, 7:17 PM
24
