5
English
Connecting the system
Connecting RX-E200 and CDX-E200
1
Connect
‰
to
‰
using the RCA pin cable.
Insert the plugs into the jacks of the same colour.
2
Connect RX-E200 and CDX-E200 with the system control cable.
The other
SYSTEM CONNECTOR
of CDX-E200 is for connecting MDX-E100 or KX-E100.
3
Connect the AC power plug of CDX-E200 to
AC OUTLET
of RX-E200.
Adding KX-E100 and MDX-E100 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1
Connect
Å
and
ı
of RX-E200 to
Å
and
ı
of KX-E100.
2
Connect
Ç
and
Î
of RX-E200 to
Ç
and
Î
of MDX-E100.
3
Connect an external component to the
AUX
terminal of RX-E200.
4
Connect
DIGITAL OPTICAL OUT
of CDX-E200 to
DIGITAL OPTICAL IN
of MDX-E100.
Take off the covers of the optical fiber cable plug, the
DIGITAL OPTICAL OUT
jack, and the
DIGITAL OPTICAL
IN
jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel
is not being used, in order to protect from dust.
5
AC OUTLET
(CDX-E200)
Connect the AC power plug of MDX-E100 or KX-E100 (Except for the UK model).
Caution
• Never turn RX-E200 on until all connections between components have been completed.
• Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
GETTING STARTED
To wall outlet
To RX-E200
RCA pin cable
<RX-E200>
<CDX-E200>
A
B
E
L
R
SYSTEM
CONNECTOR
SUBWOOFER
OUT
6
Ω
MIN./SPEAKER
SPEAKERS
FM ANT
GND
AM ANT
75
Ω
UNBAL
D
L
R
C
L
R
OUT
IN
IN
MD
CD
AUX
TAPE
L
R
SYSTEM
CONNECTOR
DIGITAL
OPTICAL
ANALOG
OUT
OUT
E
1
System control cable
2
3
