E-15
English
USING THE BUILT-IN TIMER
Timer play and recording
By using the built-in timer, you can have the unit turn on
at a specified time and begin playing or recording
automatically. You can also specify the turn off time.
3. Timer REC
Select the recording component by turning
INPUT
.
If you like to enjoy timer play with TUNER or
AUX, select “REC Mode OFF”.
4. ON Time
“ON Time” appears on the display for a second,
and changed to the time setting mode.
Press
HOUR
to set the hour.
Press
MIN
to set the minute.
5. OFF Time
Set the time the same way as above.
If you set the ON time but not OFF time, the timer
play or recording will finish automatically after an
hour.
Notes
• The display mode will change in about 8 seconds. If the
mode is changed before the setting is completed, call the
mode again by pressing
DISPLAY
once or more.
• If you select the input other than TUNER and AUX on
“2. Timer Input”, “3. Timer REC” is skipped.
2
Press
TIMER
to complete the timer setting.
The system is put in the standby mode.
• The
STANDBY
and
TIMER
indicators light up.
If you continue using the system, press
STANDBY/
ON
to turn on this unit.
To cancel the timer play setting
Press
DISPLAY
to show the current time, then press
TIMER
so that “TIMER” goes off from the display. You
can also cancel by pressing
TIMER
in standby mode.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
1
Press
DISPLAY
.
Whenever
DISPLAY
is pressed, the display mode
changes as follows:
1. Clock Time (TIMER on/off mode)
If you have not set the clock yet “Set Clock”
appears. You need to set the current time as
described on page 14.
2. Timer Input
Select the source to be played by turning
INPUT
.
• Timer recording is possible only when you select
TUNER or AUX.
STANDBY/ON
PHONES
DISPLAY
+
-
+
-
R
L
MEMORY
AUTO/MAN'L
TIME ADJ
TIMER
HOUR
PTY SELECT
MIN
BASS
TREBLE
BALANCE
MAX
MIN
VOLUME
INPUT
PRESET/TUNING
PRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
MIN
INPUT
DISPLAY
HOUR
TIMER
Before using the timer
If you want to use the cassette deck, KX-E100 or the MD
Recorder, MDX-E100 for timer play or recording, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E100 or KX-E100.
(Example)
