E-
67
English
COPYING AND RECORDING ONT
O A CD-R OR CD-R
W DISC
You can record from an external component directly to a CD-R or CD-RW disc. Following is an explanation for digital recording from an
external CD player connected to the
DIGITAL IN
(OPTICAL)
or
DIGITAL IN
(COAXIAL)
jacks on this unit.
Note
• Before starting to record, check the remaining time available for recording on the CD-R or CD-RW disc (see page 11).
RECORDING FROM AN EXTERNAL COMPONENT ONTO A CD-R OR CD-RW DISC
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME
MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE
ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN
MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDR
HDD
MIN
MAX
LEVEL
PHONES
POWER
4
4
1
1
6 3
8
2 9
OPEN/CLOSE
COPY
REC
TEXT/TIME
TRACK NO.
WRITE
MODE
MENU
CLEAR
1
ABC
2
DEF
3
GHI
4
JKL
5 MNO
6
PQR
7
STU
8 VWX
9
YZ
SPACE
SYMBOL
0
+
10
BOOKMARK
REPEAT
RANDOM
NTRO
ENTER
COMPLETE
A.M.Q.R. FINALIZE
INPUT
TIMER REC
ERASE
4
JKL
5 MNO
6
PQR
7
STU
8 VWX
9
YZ
SPACE
SYMBOL
0
+
10
BOOKMARK
REPEAT
RANDOM
GROUP SKIP
INTRO
HDD
CDR
1
6
8
9
2
3
4
6
4
4
1.
Load a new CD-R or CD-RW disc, or a CD-R or CD-
RW disc without finalization.
Press
v
(
OPEN/CLOSE
on the remote control) to open the
disc tray, and place a CD-R or CD-RW disc with its recordable
side facing down. Then press
v
(
OPEN/CLOSE
on the remote
control) to close the disc tray.
2.
Press REC.
OPC may start on the loaded CD-R or CD-RW disc depending
on its recording condition. It takes approximately 15 seconds to
complete the adjustment.
If this unit determines that OPC is not needed for the disc
loaded, “Standby” flashes on the display.
The following message appears on the display and this unit
enters the recording pause mode.
Note
• If you leave this unit in the recording pause mode for
approximately 5 minutes, this unit returns to the stop mode
automatically.
3.
Select the input source to be recorded.
When making a digital recording from an external CD player,
press
INPUT
until the
OPTICAL
or
COAXIAL
indicator
lights up.
When making an analog recording...
Press
INPUT
until the
ANALOG
indicator lights up.
O P C
A d j u s t
REC
CDR
L
R
dB
–30
–10
–6
–2
0
SYNC
S t a n d b y
REC
CDR
L
R
dB
–30 –10
–6
–2
0
SYNC
1
0 0 0
REC
CDR
L
R
dB
–30 –10
–6
–2
0
SYNC
4.
Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
to suit your needs.
Play the loudest passage (highest sound level) of the source to
be recorded.
By pressing
MENU
, the display changes for the level
adjustment. Rotate the
MULTI JOG
knob (press
+/–
on the
remote control) to adjust the recording level. When the
adjustment is completed, press
MULTI JOG
knob (
ENTER
on
the remote control) to confirm the adjusted recording level.
When making an analog recording...
Rotate the
ANALOG REC LEVEL
control to adjust the
recording level.
Note
• Adjust the recording level so that the red part on the peak
level meter does not light at the loudest sound levels.
See “Adjusting the Recording Level” on page 24 for details.
5.
Select a recording mode.
If you wish to record only one track, select “Multi Synchro”
and set to 1 track for the number of tracks to be recorded.
If you wish to start and stop recording, and place track markers
automatically, select “All Synchro”.
If you wish to automatically make finalization on a CD-R or
CD-RW disc as well, select “Full Auto”.
See “Setting the recording mode” on page 69 for details.
107_HD1300(E)60-71
02.6.24, 6:51 PM
67
