16
TRACK PROGRAMMING FOR RECORDING TO TAPE
This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording
time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of
unrecorded space remaining at each end of the tape.
■
Automatic tape programming
This is useful for recording a disc onto tape with the order of tracks unchanged.
1
Stop the unit.
2
Select the disc.
3
Enter the tape’s total possible recording time.
You can select any of four tape lengths by pressing
the TAPE button.
4
Otherwise, you can also enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
5
* By pressing the REPEAT button, the unit automatically
programs tracks for side A and side B separately
considering the tape’s total time.
6
Begin recording on the tape deck and press the
PLAY/PAUSE button on this unit at the same time.
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY/PAUSE button on
this unit.
Notes
●
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
●
In step 5, you can check the program data for side A and
side B.
➀
Shows the number of the first programmed track for each
side.
➁
Shows the total time of programmed tracks for each side.
➂
Shows the programmed track numbers for each side.
1
10
2
3
4
5
6
7
8
9
0
+
➁
➀
TAPE
REPEAT
2
3
1
6,7
4
5
(off)
➀
➁
➂
TAPE
