CONNECTIONS
8
En
■
VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
the supplied power cable into the wall outlet.
Improper setting of the VOLTAGE SELECTOR may
cause damage to this unit and create a potential fire
hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
.............................. AC 110/120/220/230-240 V, 50/60 Hz
■
Connecting this unit to the wall outlet
Plug the supplied power cable into the AC IN on the rear
panel of this unit and then plug the power cable into the
wall outlet after all other connections are complete.
This unit has a USB port and can access MP3 or WMA
files saved on your USB device. Connect your USB
device to the USB port on the front panel of this unit.
Do not disconnect your USB device while playing back
from the USB device, or when the USB indicator blinks.
■
Supported USB devices
This unit supports USB mass storage class devices (e.g.,
flash memories, card readers or portable audio players)
that use FAT16 or FAT32 format.
• Some devices may not work properly even if they meet the
requirements.
• Do not connect devices other than USB mass storage class
devices: USB chargers, USB hubs, PCs, external HDD, etc.
• When you insert two or more memory cards at the same time
into a card reader connected to the USB port on this unit, only
one of the memory cards is recognized.
• Yamaha and suppliers accepts no liability for the loss of data
saved on the USB devices connected to this unit. As a
precaution, it is recommended that the files are made backup
copies.
• Playability of and power supply to all kind of USB devices are
not guaranteed.
Connecting the supplied power
cable
To the wall outlet with the
supplied power cable
Asia and General models
only
Europe and U.K. models
Connecting USB devices
CAUTION
Notes
Downloaded from www.vandenborre.be