Operation
29
Notes
• The disc tray will not open if the computer is not turned on. With the CRW2200E drive
powered on, pressing the Eject button will not open the disc tray if ATAPI commands prohibit
ejecting a disc, such as during data reading.
• Remove the disc only after the disc tray has opened fully. Otherwise, you risk damaging the
drive or the disc.
If the disc tray fails to open for some reason, such as a malfunction of the internal
spring-loaded mechanism or power outage, it can be opened manually.
You should attempt to eject a disc manually only as a last resort.
Malfunctions may occur if you do this too frequently.
1
1
1
1
Power down the computer.
2
2
2
2
Find a pin-like tool with a diameter of 2mm or less to fit through the
Manual Eject hole on the drive’s front panel.
Note
A straightened large paper clip is ideal for this purpose.
3
3
3
3
Push the tool gently into the Manual Eject hole until the spring-loaded
mechanism ejects the tray and disc.
4
4
4
4
Power up your computer to close the disc tray.
Ejecting a Disc in an Emergency
Manual Eject hole
Paper Clip
