Yamaha CBX-D3 Скачать руководство пользователя страница 5

 

1

1

 

Safety, Warnings & Notes

 

Please read the following information before operating your CBX-D3.

 

Safety information

 

 

Make sure

 

 that the power adaptor cord is located so that it will not be walked on or snagged 

by nearby equipment.

 

Do not

 

 expose the CBX-D3 to extremes of humidity.

 

Do not

 

 place the CBX-D3 near water.

 

Do not

 

 place the CBX-D3 in areas subject to extremely low temperatures.

 

Do not

 

 place the CBX-D3 in locations subject to excessive dust.

 

Do not

 

 place the CBX-D3 in an area subject to vibration.

 

Do not

 

 expose the CBX-D3 to severe shocks.

 

Do not

 

 place the CBX-D3 in direct sunlight, close to heating units, or in an area subject to 

high temperatures.

• The ambient temperature around the CBX-D3 should be between 10˚C and 35˚C (50˚F and 

95˚F).

 

Warnings

 

• Use only the power adaptor that comes with the CBX-D3. Do not attempt to use any other 

adaptor.

• Never connect the power adaptor to the wrong type of AC receptacle. The adaptor bears a 

marking indicating the type of  receptacle to use.

• To reduce the risk of electric shock, 

 

do not

 

 remove the cover of the CBX-D3.

• To reduce the risk of fire or electric shock, 

 

do not

 

 expose the CBX-D3 to rain or moisture.

• The CBX-D3 contains no user serviceable parts. 

 

Refer all

 

 servicing to qualified personnel.

• The CBX-D3 uses digital circuits that operate at high frequencies and may interfere with the 

reception of nearby TV or radio equipment. You can eliminate such interference by 
increasing the distance between the CBX-D3 and the affected equipment.

• If any of the following occurs, please have the CBX-D3 serviced by qualified personnel:

The power adaptor cord or plug becomes damaged.
Metal object or liquid gets inside the CBX-D3.
The CBX-D3 is exposed to rain.
The CBX-D3 is dropped or the casing is damaged.
The CBX-D3 does not operate normally, or you notice a marked change in its performance 
characteristics.

 

Cleaning the CBX-D3

 

You can clean the CBX-D3 with a soft, lightly moistened cloth. Stubborn dirt can be removed 
using a mild detergent. Do not use abrasive cleaners or solvent-based cleaning fluids such as 
alcohol and benzene.

Содержание CBX-D3






























Отзывы: