Yamaha BWS 2003 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 80

Yamaha BWS 2003 Скачать руководство пользователя страница 66

SCOOTER CARE AND STORAGE

7

After cleaning

1. Dry the scooter with a chamois or

an absorbing cloth.

2. Use a chrome polish to shine

chrome, aluminum and stainless-
steel parts, including the exhaust
system.  (Even  the  thermally
induced  discoloring  of  stainless-
steel  exhaust  systems  can  be
removed through polishing.)

3. To prevent corrosion, it is

recommended to apply a corro-
sion protection spray on all metal,
including chrome- and nickel-
plated, surfaces.

4. Use spray oil as a universal

cleaner to remove any remaining
dirt.

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted surfaces.
7. Let the scooter dry completely

before storing or covering it.

EWA00002

•

Make  sure  that  there  is  no  oil
or wax on the brakes or tires. If
necessary,  clean  the  brake
discs and brake linings with a
regular  brake  disc  cleaner  or
acetone,  and  wash  the  tires
with  warm  water  and  a  mild
detergent.

•

Before operating the scooter
test its braking performance
and cornering behavior.

ECA00013

•

Apply spray oil and wax
sparingly and make sure to
wipe off any excess.

•

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

•

Avoid using abrasive polishing
compounds as they will wear
away the paint.

NOTE :
Consult a Yamaha dealer for advice on
what products to use.

7-3

«
...
64
65
66
67
68
...
»

Содержание BWS 2003

















































































Отзывы:

Нет отзывов