9. Press the “ ” (On/standby) key to turn on the power.
The FA mode is activated and the screen appears on the TV monitor as shown below. (Fig. 12)
10. Load the test disc on the disc tray according to the direction displayed on the TV monitor screen, and push the disc tray
to close it. Then playback starts automatically, and then the disc tray opens automatically after playback ends. (Fig. 13)
Repeat above procedure 4 times to complete the playback capability test by using 4 kinds of test discs.
*
Required time for play
• BD-ROM SL : About 30 seconds
• BD-R DL :
About 60 seconds
• DVD-ROM DL : About 60 seconds
• CD-ROM :
About 30 seconds
(BD ROM DL: Not for service)
Fig. 12
Fig. 13
11. “Pass” is displayed when the playback capability test is completed successfully.
If “Fail” is displayed, check that the test discs are not dirty and scratched, then perform test from procedure 8 again.
12. Press the “
” (Stop) key to cancel the FA mode.
TV monitor screen is turned off and “OK C3” is displayed on the FL display of this unit.
13. Press the “ ” (On/Standby) key to turn off the power.
Note:
Be sure to cancel the FA mode by pressing the “
” (Stop) key before turning off the power. Otherwise the FA
mode is activated next time the power is turned on.
Insert Disc :
CD-ROM
Current Disc :
Current Stage :
Press "Stop" key to disable FA mode and UI exit OSD TEST mode
Insert Disc :
BD-ROM SL
Current Disc :
BD-R DL
Current Stage : Test fi nish
Pass
Press "Stop" key to disable FA mode and UI exit OSD TEST mode
TV monitor screen
TV monitor screen
30
BRX-610/NS-PZ20
BRX-61
0/NS-PZ20
Содержание BRX-610
Страница 4: ...U C models T model REAR PANELS G model F model L model BRX 610 9 BRX 610 NS PZ20 BRX 610 NS PZ20 ...
Страница 5: ...NS PZ20 NS B20 NS C20 U model NS SWP20 10 BRX 610 NS PZ20 BRX 610 NS PZ20 ...
Страница 51: ...MEMO MEMO BRX 610 NS PZ20 57 ...
Страница 57: ...63 BRX 610 NS PZ20 BRX 610 NS PZ20 SOFTWARE UPGRADE ...