page 12
Important hint when visiting the repair-shop or
software-updates on your pedelec
If you have in mind to update your pedelec software or wish to perform
the Bosch system with a customer service, please have a look on
bikespeed and check on our website www.bikespeed.de, whether the
tuning continues to work with a later software or not.
For a software-update to your Yamaha-system you have to uninstall the
bikespeed-RS. Alternatively, there is the service mode on the bikespeed-
RS that needs to be activated at your retailer.
Therefore, change the level of support 3x down and then 3x up. Please
enter the combination continuous without a pause of 3 seconds between
two keys. Begin on the highest level. The correct input will be confirmed
by 3x alternate blinking the trip-Time between 00:00 and 11:11. The
software status of the bikespeed-RS is shown during this procedure. Now
the tuning is in service mode and maintenance as well as software
updating can be executed.
If you have a bikespeed-RS
c
you use the combination you chose
beforehand. (see page 14, paragraph „Description of the custom variant“)
This state is maintained even after deactivating the system. That is why
there will not be an animation of the battery’s capacity informing about
the state of the tuning.
