manualshive.com logo in svg

Yamaha Big Bear YFM400R, Руководство пользователя

Поделиться
Скачать
Yamaha Big Bear YFM400R Скачать руководство пользователя страница 149

8-40

EBU00440

Troubleshooting chart

1. Fuel

Check if there is fuel
in the fuel tank.

There is fuel.

Turn the fuel
cock to “OFF”.

Remove the fuel pipe.

Fuel cock
clogged.

Clean fuel
cock.

Some fuel.

Turn the fuel
cock to “RES”.

Restart engine.

No fuel.

Supply fuel.

2. Compression

Use the electric starter
to see if there is
compression.

There is compression.

No compression.

3. Ignition

Remove the plug and
check the electrodes.

Wet

Wipe clean with
dry cloth.

Dry

Attach plug cap and
ground to chassis.

Use the
electric starter.

Spark good.

Ignition system
normal.

Spark weak.

Adjust plug gap
or replace plug.

No spark.

Ask a Yamaha dealer to inspect.

4. Battery

Use the electric starter.

Engine turns over
quickly.

Battery good.

Engine turns over
slowly.

Check fuel
flow.

Turn the fuel
cock to “ON”.

Compression normal.

Ask a Yamaha dealer to inspect.

Recharge, check 
connections.

No fuel.

U5GW13.book  Page 40  Tuesday, July 30, 2002  2:23 PM

Содержание Big Bear YFM400R











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды