manualshive.com logo in svg

Yamaha BEARTRACKER YFM250XP, Руководство пользователя

Поделиться
Скачать
Yamaha BEARTRACKER YFM250XP Скачать руководство пользователя страница 44

5-3

EBU00883

Front and rear brakes 
Brake levers and brake pedal
Check for correct free play in the brake levers
and brake pedal. If the free play is incorrect,
adjust it. (See pages 8-19 ~ 8-23.)
Check operation of the levers and pedal. They
should move smoothly and there should be a
firm feeling when the brake is applied. If not,
have the ATV inspected by a Yamaha dealer.

Brake fluid level (Front brake)
Check the brake fluid level.
Add fluid if necessary. (See pages 8-18 ~ 8-19.)

Brake fluid leakage
Check to see if any brake fluid is leaking out of
the hose, joint or master cylinder of the front
brake. Apply the brake firmly for one minute. If
the lever moves slowly inward, there may be a
leak in the brake system. If there is any leak-
age, the brake system should be inspected by
a Yamaha dealer.

Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking per-
formance, inspect the brakes for wear. (See
page 8-17.)

Recommended brake fluid: DOT 4 

Содержание BEARTRACKER YFM250XP




































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды