Yamaha BANSHEE 350 YFZ350Z, Руководство пользователя

Страница: 108 / 146

8-30
1
2
3
4
5
6
7
8
9
10
11
7. Tighten the mixing chamber cap securing
plate screw to the specified torque.
8. Tighten the carburetor joint screws.
Adjusting the throttle cables
1. Move the throttle lever a few times.
2. Push the throttle lever forward until it stops
and hold it in this position.
3. Check through each carburetor window to see
if the punch mark on the throttle valve is at the
specified position.
4. If not, loosen the locknut and turn the adjust-
ing nut until the specified position is obtained.
1. Mixing chamber cap securing plate
2. Projection
3. Slot
4. Screw
Tightening torque:
Mixing chamber cap securing plate screw:
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
1
2
3
4
1. Punch mark
2. Specified position: 0–1mm
1
2
✦✯✬✩✧✤✲✣ ✦✣