Yamaha BADGER YFM80N Скачать руководство пользователя страница 141

Страница: 141 / 141

PRINTED ON RECYCLED PAPER

PRINTED IN JAPAN

2000·3–1.7

(E)

YAMAHA MOTOR CO., LTD.

Improper ATV use can result in SEVERE INJURY or DEATH.

WARNING

ALWAYS USE

AN APPROVED

HELMET AND

PROTECTIVE GEAR

NEVER USE

ON PUBLIC

ROADS

NEVER CARRY

PASSENGERS

NEVER USE

WITH DRUGS

OR ALCOHOL

NEVER operate:

without proper training or instruction.

at speeds too fast for your skills or the
conditions.

on public roads - a collision can occur
with another vehicle.

with a passenger - passengers affect
balance and steering and increase risk
of losing control.

ALWAYS:

use proper riding techniques to avoid
vehicle overturns on hills and rough
terrain and in turns.

avoid paved surfaces - pavement may
seriously affect handling and control.

LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS.

(For replacement manual, call 1-800-532-1558)

EBU00438

Содержание BADGER YFM80N














































































































































Результаты поиска

Содержание BADGER YFM80N

Отзывы:

Yamaha BADGER YFM80N, Руководство пользователя, Страница: 141 / 141

Результаты поиска

Содержание BADGER YFM80N

Отзывы: