15
After connection and setup is finished, try to play your bass guitar.
Controller and Switch
●
Play a synth sound only
•
Set the output select switch to the SYNTH
position
•
Use the VOL knob to control the synth
volume. Turn the knob right to increase the
volume and left to decrease.
•
The UP/DOWN buttons can be used to select
different synthesizer voices and other func-
tions on the Guitar MIDI Converter.
If you are using the G50, you can increase or
decrease, by a value of one, Program Memory
Numbers, Parameter Values, Program Num-
bers, and Octave Shift Values.
Refer to the Guitar MIDI Converter manual
for more information.
●
Play the Bass Guitar sound only.
•
Set the output select switch to the BASS
position.
•
The bass direct signal volume will not change
even if the VOL knob is turned.
●
Play the Bass Guitar and Synth sounds
together.
•
Set the output select switch to the MIX
position.
•
Turning the VOL knob changes the synthesizer
volume only. The bass guitar’s volume will not
change.
•
The UP/DOWN buttons function is identical to
that described in the “Play a synth sound only”
section above.
Volume Control
Memory or Parameter,
etc., switch
