background image

2

Location

Do not expose the B1D to the following condi-
tions to avoid deformation, discoloration, or more
serious damage.

 • Direct sunlight (e.g. near a window).
 • High temperatures (e.g. near a heat source,

outside, or in a car during the daytime).

 • Excessive humidity.
 • Excessive dust.
 • Strong vibration.

 Connections

When connecting the B1D to the Yamaha G50
Guitar MIDI Converter, be sure to use the
specified multi-pin cable (supplied with the
G50 Guitar MIDI Converter).

 • Always connect the direct guitar cable (page

4), even if you don’t intend to use the direct
guitar sound. The direct guitar cable is
essential for proper grounding, to minimize
noise and prevent electric shock.

 • Always unplug cables by gripping the plug

firmly, not by pulling on the cable.

 • Disconnect all cables before moving the

instrument or any connected equipment.

 Handling and Transport

Never apply excessive force to the controls,
connectors or other parts of the instrument.

 • Physical shocks caused by dropping, bump-

ing, or placing heavy objects on the instru-
ment can result in scratches and more serious
damage.

 • Be careful not to damage the B1D controller

when placing the guitar in a case or on a
stand.

Precautions  

!! PLEASE READ THIS BEFORE PROCEEDING !!␣

Yamaha is not responsible for damage caused by improper installation, handling, or operation.

Cleaning

 • Clean the unit with a dry soft cloth.
 • A slightly damp cloth may be used to remove

stubborn grime and dirt.

 • Never use cleaners such as thinner.

Notes on Adhesive Tape

 • Depending on the surface of the bass guitar the

finish may peel off or be altered chemically
when the pickup/controller is mounted using
adhesive tape (double-sided). To make sure, it
is recommended that you first try this method
of attachment by applying some tape at a place
on the guitar body which is not visible nor-
mally.

 •

If the pickup must be removed from the base guitar,
always use a fresh layer of double-sided adhesive
tape and/or cushion when reinstalling, as the
adhesive properties of used tape/cushion are reduced
drastically when peeled off the mating surface. Also,
before attaching the adhesive tape or pickup, clean
the mating surface thoroughly, as dust and grease
may cause the pickup to come loose.

Service and Modification

 • The B1D contains no user serviceable parts.

Opening it or tampering with it in any way can
lead to irreparable damage and possibly electric
shock. Refer all servicing to qualified
YAMAHA personnel.

Содержание B1D























Отзывы: