9
English
TO RECORD A SOURCE TO TAPE
1
Select the source to be recorded.
*
To dub from tape to tape, refer to the “Notes” shown at
right.
*
When you select AUX, PHONO, TUNER or CD, make
sure that neither TAPE 1 nor TAPE 2 is also selected.
2
Play the source and then turn the VOLUME control up
to confirm the input source.
3
Begin recording on the tape deck.
4
To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
AUX
TUNER
CD
PHONO
TAPE 1
MONITOR
TAPE 2
COPY
SPEAKERS
A
B
ON
OFF
ON
OFF
PHONES
POWER
TAPE 1
MONITOR
AUX
TUNER
CD
PHONO
TAPE 2
CD DIRECT
AMP
VOLUME
NATURAL SOUND STEREO AMPLIFIER AX-390
COPY
BALANCE
BASS
TREBLE
LOUDNESS
1, 4
2
Notes
●
VOLUME, BASS, TREBLE, BALANCE, LOUDNESS
controls and CD DIRECT AMP switch settings have no
effect on the material being recorded.
●
To dub from tape to tape, select TAPE 2 by pressing it.
Only the following method of dubbing can be made by using
this unit.
SOURCE
Tape deck connected to
the TAPE 2 terminals.
RECORDER
Tape deck connected to
the TAPE 1 terminals.
→
