Yamaha AW4416, Руководство по обслуживанию

Страница: 76 / 154

35
AW4416
ADP25H
(2.5 inch hard disk adapter)
HARD DISK INSTALLATION
• Hard disks are precision devices. Do not subject them to physical shock or static electricity, etc.
• Do not place a hard disk nearby devices that produce a strong magnetic field, or in locations of extreme cold, heat, or
moisture.
• Before you handle a hard disk, touch your hand to a grounded metallic object to release any static charge that may be
present in your body or clothing. If you fail to do so, static electricity may damage the hard disk.
• Never attempt to disassemble a hard disk or apply excessive force to it.
• The AW4416 is shipped with four screws for attaching a 2.5 inch hard disk, and four screws for attaching a CD-RW drive,
making a total of eight included screws of the same type.
1. You will need the following items.
• The AW4416 itself
• A 2.5 inch IDE hard disk (sold separately) for installation
• Four screws included with the AW4416 for attaching the 2.5 inch hard disk (Pan washer head screw 3.0 X 4 VS676500)
• A philips (+) screwdriver
2. Make sure that the power of the AW4416 is turned off. For safety’s sake, disconnect the power cable from the
AC outlet.
3. On the rear panel of the AW4416, remove the two screws that hold the ADP25H (PN-HDD circuit board) 2.5
inch hard disk adapter to the 2.5" HARD DISK DRIVE slot.