Yamaha AW4416, Дополнение к руководству

Страница: 38 / 48

MIDI data format
38
Version 2.0 Manual Supplement
2.1.5 OUT/THRU
Select whether the MIDI OUT/THRU connector will
function as OUT or as THRU.
If THRU is selected, messages received at the MIDI IN
connector will be re-transmitted without change from the
MIDI OUT/THRU connector.
Regardless of the MIDI/HOST setting, the connector will
function as a THRU connector if the THRU setting is
selected. If you want to use the connector as MIDI OUT,
the MIDI/HOST setting must be OUT.
2.1.6 TO HOST
If the TO HOST connector is selected, choose one of
three settings depending on the type of computer that is
connected.
2.1.7 MIDI Clock ON/OFF
Specify whether MIDI Clock will be used.
If this is ON, MIDI Clock will be transmitted from the
connector selected by MIDI/HOST.
2.1.8 MTC ON/OFF
Select whether MTC will be used.
If this is ON, MTC will be transmitted from the connector
selected by MIDI/HOST.
Regardless of this setting, MTC will always be transmitted
from the MTC OUT connector.
2.2 Program change assign table
This table allows you to freely specify the correspon-
dence between Program Change No. and Scene No.
This table is used for conversion for both transmission
and reception.
2.3 Control change assign table
This table allows you to freely specify the correspon-
dence between Control Change No. and Parameter
name.
This table is used for conversion for both transmission
and reception.
3. MIDI format list
3.1 CHANNEL MESSAGE
command rx/tx function
-------------------------+-----+---------------------------------------
8n NOTE OFF rx Control the internal effect
9n NOTE ON rx Control the internal effect
Bn CONTROL CHANGE rx/tx Edit parameters (use the Control
Change Assign Table)
Cn PROGRAM CHANGE rx/tx Switch scene memories (use the
Control Change Assign Table)
3.2 SYSTEM COMMON MESSAGE
command rx/tx function
-------------------------+-----+---------------------------------------
F1 MIDI TIME CODE rx/tx MTC transmission (when MTC
Master), MTC reception (when
MTC slave)
F2 SONG POSITION POINTER tx SPP reception (when MIDI Clock
is used)
3.3 SYSTEM REAL TIME MESSAGE
command rx/tx function
-------------------------+-----+---------------------------------------
F8 TIMING CLOCK tx MIDI Clock transmission (when
MIDI Clock is used)
FA START tx Start command transmission
(when MIDI Clock is used)
FB CONTINUE tx Continue command transmission
(when MIDI Clock is used)
FC STOP tx Stop command transmit (when
MIDI Clock is used)
FE ACTIVE SENSING rx Check MIDI cable connections
FF RESET rx Clear running status
3.4 SYSTEM EXCLUSIVE MESSAGE
3.4.1 Real Time System Exclusive
3.4.1.1 MMC
command rx/tx function
-------------------------+-----+---------------------------------------
01 STOP rx/tx Transport stop
02 PLAY rx
Transport play
03 DEFERRED PLAY rx/tx
Transport play
04 FAST FOWARD rx/tx
Transport fast-forward
05 REWIND rx/tx
Transport rewind
06 RECORD STROBE rx
Transport punch-in record
07 RECORD EXIT rx
Transport punch-out
0F RESET rx/tx
MMC reset
40 WRITE rx
Write data field
44 LOCATE rx/tx
Transport locate
3.4.2 Bulk Dump & Request
data
name
rx/tx function
-----+-------+------------------------------------
'M' rx/tx Scene Memory & Request
'S' rx/tx Setup Memory & Request
'R' rx/tx Remote Memory & Request
'Q' rx/tx Equalizer Library & Request
'Y' rx/tx Dynamics Library & Request
'E' rx/tx Effect Library & Request
'T' rx/tx Patch Library & Request
'H' rx/tx Channel Library & Request
'A' rx/tx Automix Memory & Request
'P' rx/tx Program Change Assign Table & Request
'C' rx/tx Control Change Assign Table & Request
3.4.3 Parameter Change
Parameter
type
rx/tx function
-----+-------+------------------------------------
0x00 rx/tx edit buffer (byte operation format)
0x01 rx system memory (byte operation format)
0x02 rx/tx function call (mem/lib recall,mem/lib
store)
0x10 rx/tx edit buffer (7bit operation format)
0x40 rx/tx edit buffer (bit operation format)
0x41 rx system memory (bit operation format)
0x43 rx controller (key remote) (bit opera-
tion format)
4. MIDI format details
4.1 NOTE OFF (8n)
< Reception >
Received when [Rx CH] matches.
Used to control effects. Refer below for details.
STATUS 1000nnnn 8n Note Off Message
DATA 0nnnnnnn nn Note No.
0vvvvvvv vv Velocity ( ignored)
4.2 NOTE ON (9n)
< Reception >
Received when [Rx CH] matches.
Used to control effects. Refer below for details.
Velocity of 0x00 is equivalent to Note-Off.
STATUS 1001nnnn 9n Note On Message
DATA 0nnnnnnn nn Note No.
0vvvvvvv vv Velocity (1-127:On, 0:off)
* Effect control by Note
1: Dynamic Flange/Dynamic Phase/Dynamic Filter
When the SOURCE parameter is set to MIDI, the note
velocity (both note-on and note-off) is used to control the
Modulation frequency width.