25
STEP-BY-STEP PROCEDURES
Recalling the Initial Data Scene on an AW2816
All of the internal settings on an AW2816 can be stored in the internal memory as a ''scene''. Scene 00 in
the AW2816
is the ''Initial Data'' setting. Recalling Scene 00 on the AW4416 sets the Mixer back to its
default settings. Unless the settings from the previous Song are needed, Scene 00 should always be
recalled before starting a new Song.
NOTE: The demo Song of the AW2816 has an Expander on the Stereo Bus. If the current Song is the
demo Song, and if Scene 00 is not recalled before starting a new Song, the Expander settings carried
over from the demo Song can create an unwanted effect on the audio when the Stereo Bus level falls
below -35 dB.
1)
Press the
[SCENE]
button. The 'SCENE MEMORY LIBRARY' will appear.
2)
Press the
[F1]
button.
3)
Turn the
(DATA/JOG)
dial to select '00.Initial Data' from the 'No. LIBRARY TITLE' list box.
4)
Press the o 'CURSOR' buttons to move the cursor to 'RECALL'.
5)
Press the
[ENTER]
button. The 'CONFIRMATION' prompt window will appear with the message,
'ARE YOU SURE?'.
6)
Press the 'CURSOR' button to select 'OK'.
7)
Press the
[ENTER]
button to execute the scene recall operation.
