manualshive.com logo in svg

Yamaha AW 1600, Руководство пользователя

Yamaha AW 1600 - полнофункциональная многодорожечная цифровая рабочая станция для звукозаписи. Можно скачать бесплатно брошюру и технические характеристики, а также руководство по эксплуатации на manualshive.com. Удобный и профессиональный инструмент для музыкантов и звукорежиссеров.

Поделиться
Скачать
background image

Troubleshooting

205

AW1600  Owner’s Manual

Appendix

■

Can’t receive MMC messages

• Is the MIDI cable connected to the MIDI IN connector?

• In the UTILITY screen MIDI 2 page, has MMC MODE 

been set to SLAVE? Does the DEVICE NO. match?

■

Can’t use the preset remote settings

• Depending on the sequencer that you want to control, you 

may need to make settings on the sequencer. For details, 
refer to page 209.

• Select the connector and port to be used (MIDI connector, 

USB connector port 1/2) in the UTILITY screen MIDI 1 
page.

■

Can’t save a file

• Is there sufficient space on the internal hard disk to create 

a new song?

• Did you perform the correct shut-down procedure when 

you last turned off the power?

→

Disconnecting the power without performing the shutdown 
operation will shorten the lifespan of the hard disk and CD-
RW drive, may damage the hard disk and CD-RW drive and 
disc, and may result in loss of data.

• Is the internal hard disk be subjected to strong physical 

shock?

■

AW2816 backup files cannot be saved

• Songs with a large data size cannot be saved. Try execut-

ing the Optimize function from the SONG screen LIST 
page.

■

Song file size is unnaturally large

• Even after you use recorder editing operations to erase a 

track or other data, that sound file will remain on the disk. 
Execute the Optimize command in the SONG screen LIST 
page.

■

Can’t create an audio CD

• Is CD-R/RW media inserted?

• The inserted CD-R may have already been finalized.

• Is a signal recorded on the stereo track?

• The stereo track must be at least four seconds long.

• Have you saved a song after the stereo track has been 

recorded?

■

An audio CD you created does not play back 
on a conventional player

• An audio CD you created you not play back on a conven-

tional player unless the disc has been finalized.

■

Audio recorded on CD-RW media does not 
play back on some players

• In order for audio data recorded on CD-RW media to be 

played back, the player must support CD-RW. Contact the 
manufacturer of the player regarding CD-RW support.

■

The sound skips while playing an audio CD 
that you created

• Depending on the CD-R media you use, there may be dif-

ferences in the quality of the completed CD.

■

The computer doesn’t recognize the 
AW1600 hard disk

• Is the USB cable properly connected?

• Is your computer running the appropriate operating sys-

tem?

→

Windows XP Professional/Home Edition SP1 or higher, or 
Mac OS X 10.3 or higher. Operation is not guaranteed with 
other operating systems.

• Is the USB storage mode turned ON?

■

Can’t find WAV files copied from the com-
puter to the Transport folder

• Have you copied WAV files with a different bit depth from 

the song? Have you copied WAV files with sampling fre-
quency other than 44.1 kHz?

■

Can’t find WAV files copied from the com-
puter to the Audio folder

• Did you change the bit depth of the WAV file when editing 

it with waveform editing software?

→

For 24-bit songs audio data is saved in the Audio folder in 
32-bit WAV file format.

• Have you changed the file name?

• Did you copy the file(s) to a different folder?

■

Can’t copy files from the computer

• Files larger than 4 GB cannot be copied.

■

An error message appears when discon-
necting the AW1600 from a Windows com-
puter

• Before turning the USB storage mode OFF, remove the 

device via the “Safely Remove Hardware” icon in the 
taskbar.

• Close all AW1600 windows before removing the device 

via the “Safely Remove Hardware” icon.

■

Can’t hear any pitch change?

• Make sure that RATE is NOT set to “000.”

• Make sure that BYPASS is off.

■

The voice is not recognized

• When the voice is high, set TYPE to FEMALE; when it is 

low, set TYPE to MALE.

■

Pitch correction doesn’t sound right

• In some cases, pitch correction may sound unnatural — 

especially for parts sung with vibrato. To make the pitch-
corrected vocal sound more natural and subtle, set 
DETECT to a relatively short value and set RATE to a rel-
atively slow value.

Song operations

CD operations

WAV File Transfer To and From a 
Computer

Pitch Fix operations

Содержание AW 1600









































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AW 1600

ABB SM1000 Replacing Instructions preview
SM1000
Бренд: ABB Страницы: 8
Gazelle G9407-Log Operating Instruction preview
G9407-Log
Бренд: Gazelle Страницы: 2
Hammond Organ A-100 Series Theory Of Operation preview
A-100 Series
Бренд: Hammond Organ Страницы: 25
Hammond Organ L-100 Series Service Manual preview
L-100 Series
Бренд: Hammond Organ Страницы: 87
Laserworld GREEN-3000 Manual preview
GREEN-3000
Бренд: Laserworld Страницы: 4
Laserworld GREEN-12000 Manual preview
GREEN-12000
Бренд: Laserworld Страницы: 4
Laserworld GREEN-150E Manual preview
GREEN-150E
Бренд: Laserworld Страницы: 4
LaserLiner SensoLite 120 Quick Start Manual preview
SensoLite 120
Бренд: LaserLiner Страницы: 56
Lasermet ICS-6 Wiring Manual preview
ICS-6
Бренд: Lasermet Страницы: 8
jenway 6405 Operating Manual preview
6405
Бренд: jenway Страницы: 52
YOKOGAWA BT200 User Manual preview
BT200
Бренд: YOKOGAWA Страницы: 53
Pasco Scientific Precision 2.0 Instruction Manual And Experiment Manual preview
Precision 2.0
Бренд: Pasco Scientific Страницы: 11
AR Arrim ONE User Manual preview
Arrim ONE
Бренд: AR Страницы: 8
YOSensi YO Meter Pulse User Manual preview
YO Meter Pulse
Бренд: YOSensi Страницы: 27
IDEAL 61-737 Operation And Safety Manual preview
61-737
Бренд: IDEAL Страницы: 84
Supertech agroline Superpro Combi Instruction Manual preview
Superpro Combi
Бренд: Supertech agroline Страницы: 10
Lab systems VP600S Product Information And Instructions preview
VP600S
Бренд: Lab systems Страницы: 5
Raytech TR-MARK III Instruction Manual preview
TR-MARK III
Бренд: Raytech Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды